Where to find 46-47 tailshaft assy?

[CC-Mo]

Looking for a 46-47 Ford pickup tailshaft assy with yoke.
Been hitting the vendors with no luck. Any suggestions?
Thanks guys.

 

[V8COOPMAN]

Looking for a 46-47 Ford pickup tailshaft assy with yoke.
Been hitting the vendors with no luck. Any suggestions?
Thanks guys.

They show-up here in the "SWAP MEET" section on occasion, as well as eBay, etc. But Mac VanPelt (click on the link BELOW) is a long-time FordBarn member and expert on these old Ford transmissions. He has a huge inventory of new/used parts and has a rebuilding service, also. Call and ask for Mac. Coop


http://www.vanpeltsales.com/FH_web/flathead_home.htm


.

 

[CC-Mo]

Thankyou Sir! I’ll give him a look.

 

[deuce lover]

Here.He also has the main shaft in another auction

https://www.ebay.com/itm/155004342990?hash=item2416fa92ce:g:kakAAOSwOXliqlG7
https://www.ebay.com/itm/155004342323?hash=item2416fa9033:g:MqYAAOSwCX5iMHNm

 

[cas3]

Are you talking about the output shaft in the trans, or a drive shaft?

 

[deuce lover]

He did not mention the driveshaft.Just the tail shaft assy and yoke so I posted what I saw on EBAY.

 

[V8COOPMAN]

Are you talking about the output shaft in the trans, or a drive shaft?

An "OUTPUT" shaft is technically called a "MAIN SHAFT"....the same shaft that the yoke slides onto. Coop

.

 

[CC-Mo]

Are you talking about the output shaft in the trans, or a drive shaft?

The trans output shaft is what I’m hunting for.

 

[CC-Mo]

An "OUTPUT" shaft is technically called a "MAIN SHAFT"....the same shaft that the yoke slides onto. Coop

.

I’ve got a call in to vanpelt. Waiting on a callback. Thanks again.

 

[V8COOPMAN]

The trans output shaft is what I’m hunting for.

Those YOKES have become extremely hard to find. It's been said that an early, cast-iron Powerglide yoke (16-spline) will fit, but no guarantees on that one. Coop

.

 

[CC-Mo]

The application is going from a ‘39 trans to a 9” rear. It’s in a ‘33 coupe.
The eBay link posted above looks like the goods.
Wishful thinking but it’d be nice to find a complete adapter & shaft, yoke, seals & all.
If not, I can piece it together.

 

[V8COOPMAN]

The application is going from a ‘39 trans to a 9” rear. It’s in a ‘33 coupe.
The eBay link posted above looks like the goods.
Wishful thinking but it’d be nice to find a complete adapter & shaft, yoke, seals & all.
If not, I can piece it together.

Mac (Mac VanPelt) is likely going to be the only source that MIGHT be able to supply you with a complete package like that. Coop

.

 

[bbrocksr]

I've got the whole works less the yoke.
Bill

 

[CC-Mo]

I've got the whole works less the yoke.
Bill

I’ll keep you in mind also & thanks!

 

[oldskool]

is the trans a 3 or 4 speed?

 

[CC-Mo]

is the trans a 3 or 4 speed?

It’s a 3 speed

 

[larrys40]

I think you sent me a pm, my box is pretty full so it might not take messages till I delete some. I have a complete trans with that setup and maybe the back and shaft. I can look if you still haven’t found one.
Let me know ….
Thanks
Larry Shepard

 

[CC-Mo]

I think you sent me a pm, my box is pretty full so it might not take messages till I delete some. I have a complete trans with that setup and maybe the back and shaft. I can look if you still haven’t found one.
Let me know ….
Thanks
Larry Shepard

Larry, yup I sent you a pm & text unless your cell # changed. Yes when you get a chance, check out what you have & let me know.
Plus, I know where you live & there’s a good Pizza place nearby.