Bought '61 Falcon V8/5speed/ 5lug

[Newc]

Need dash plastic/turn signals/ horn ring/ seat belts/ wiring/ heater cold/ e brake handle/ little stuff. Best site??? Newc

 

[KULTULZ]

Need dash plastic/turn signals/ horn ring/ seat belts/ wiring/ heater cold/ e brake handle/ little stuff. Best site???

Newc

START HERE - https://www.falconclub.com/

 

[55blacktie]

Newc, how about a photo?

 

[Newc]

found some with Carpenter parts. Newc

 

[KULTULZ]

The FALCON site was little help?

 

[Newc]

Also found a bunch of Mustang parts fit! Newc

 

[rotorwrench]

The little cars of the early 60s had similar designs for a lot of this stuff. If it's already a resto-mod then just find matching stuff that can be made to work. Falcon, Mustang, Fairlane, Meteor, or Comet stuff is all similar in ways.

 

[frank long island]

pm me i have some leftovers from a 64 if that helps

 

[Newc]

Neighbor gave up on this Falcon. V8-5spd, new wheels/tires 5lug hubs/rear end. New green paint. Can not find little plastic circle clips for trim? Needs interior work. Newc

 

[Alaska Jim]

not a bad little car, buy if it were mine I would lose that chev. HEI style of dist. don't get me wrong they work great, but to me they look way out of place in a Ford, a little on the ugly side to me, but that is just my opinion. I am just glad that these cars are being saved

 

[55blacktie]

The distributor does look disproportionately large, but the camera might exaggerate it. I wouldn't lose any sleep over it. However, if the car is parked on level ground in the photos, I would raise the front. Personally, I think raising the front would look better than dropping the rear.

 

[KULTULZ]

...not a bad little car, buy if it were mine I would lose that chev. HEI style of dist. don't get me wrong they work great, but to me they look way out of place in a Ford, a little on the ugly side to me, but that is just my opinion. I am just glad that these cars are being saved

... ...

!!!I'M BLIND !!!

CHINESEIUM HEI w COIL IN CAP ...​

 

[Newc]

Still need the little plastic circle clips for the trim installation. Come in three sizes and the middle one is sold out at the Mustang shop. Newc

 

[KULTULZ]

Still need the little plastic circle clips for the trim installation. Come in three sizes and the middle one is sold out at the Mustang shop. Newc

They cannot SPECIAL ORDER it for you?

 

[frank long island]

try restoration hardware in pa they have a vast stock i got the clips for my side trim from them

 

[Newc]

Found a Falcon parts sight. Looks good. Falcon Enterprises -the best. thanks all. Newc