Installing 1934 light switch assembly

R

Rsb43

Member
Located at the bottom of steering column(disconnected when I received car), when I attempt to install the light switch assembly, it just slides back out. (There is a missing bolt on the collar just above where the assembly slides in). Any help is appreciated. I’m a newer member and don’t have a good hold of how to communicate on messenger, so please be patient ( I’ve tried posting pictures and can not for some reason). I may also be reached direct at 845.821.3855
Thank you in advance
 
Do you have the C clip on the bottom of the light/horn rod that holds the fork thingy in place?
 
This is what you need from Third Gen Automotive > https://www.ebay.com/itm/390997752509?fits=Make:Ford&hash=item5b09483abd:g:YXcAAOSwQ~VfiLj3

1928-39 Ford light switch spider, spring , and clip B-3643-KT (Fits: Ford)

New (Other)
$9.14
Buy It Now
+$6.00 shipping
122 sold
⁣ ⁣ ⁣ ⁣


IMG_8418_InPixio-300x300.png
 
Last edited:
If the silver, two piece switch holder is sliding out from the bottom of the steering box, them it's just missing the bail. If the horn rod is sliding out of the top of the column, the "C" horseshoe clip is missing and the spring is pushing the horn rod out the top.
 
Thank you everyone! Light switch Bail ordered, but I am unable to locate light switch bracket bolt that was missing......any idea of who might stock a set?
 
If it's the bolt with the arrow just go to the hardware store.
 

Attachments

  • Flathead_SteeringGear_1933to36.jpg
    Flathead_SteeringGear_1933to36.jpg
    55.6 KB · Views: 57
You must log in or register to reply here.
Back
Top