1935 - 1936 lower inner cowl

[uncle buck]

Does anyone reproduce the lower inner cowl for a 35 or 36 passenger car like the 33-34 example pictured below?

 

[petehoovie]

Does anyone reproduce the lower inner cowl for a 35 or 36 passenger car like the 33-34 example pictured below?

 

[325w]

Copy the right.install it covered by the kick panel. Mash the gas.

 

[swedishsteel]

I discovered a series of u tube videos--fitzees fabrications--that are excellent, showing how we hobby schlubbs can make these types of pieces using basic tools we already have. Check it out. I'm not associated with it in any way--he is Newfondland, I'm in Minnesota.

 

[Zeke3]

I am a big fan of fitzee's fabrications on You Tube also.

 

[OldGold360]

If this part is no longer made, and you don’t mind spending a few bucks, look up local metal shapers, or hot rod/restoration shops that focus on metalshaping. DO NOT ask a welding or fabrication shop. Typically metalshaping and sheetmetal is not their specialty. I know of a few shops, besides myself, that do this work full time. Of course it helps to have something to go off of, such as the opposite side. Is the side you need to replace completely missing, or is there enough there to use for patterns and dimensions… or if you still have what’s left of this piece, perhaps it can be repaired.

 

[uncle buck]

It looks like I will be fabricating them.

 

[kustoman]

McPherson Auto Restorations in Kansas do a full subrail kit, that might cover the bottom part of this.

 

[uncle buck]

McPherson Auto Restorations in Kansas do a full subrail kit, that might cover the bottom part of this.

I thought I had read that they no longer make them?