36 PU-After market muffler?

R

RickMcK

Member
I'm looking for a after market muffler for my 36 pick up. I don't want to pay $350, for a Ford script reproduction. Does anyone know if there is a generic one that will interface with the existing stock exhaust system?

Sent from my LM-V405 using Tapatalk
 
RickMcK said:
I'm looking for a after market muffler for my 36 pick up. I don't want to pay $350, for a Ford script reproduction. Does anyone know if there is a generic one that will interface with the existing stock exhaust system?

Sent from my LM-V405 using Tapatalk
Click to expand...

Rick, If you have the old muffler, take it to NAPA. Ask for a counter person that can think beyond a computer screen. There are books there that depict every muffler they sell. Each has every dimension listed.
There are also after-market places that can supply you. Waldron's comes to mind.
 
You can also search muffler on Rock Auto and pick a muffler by inlet size from 1.65” to 4”
 
I used a Walker 18179 on my otherwise stock '36 pickup exhaust system (stock 221 cu in poured bearing motor), went on with minimal fiddling (cut a little bit off the tailpipe side to just leave a straight stub, and cut off a small unused bracket) -cost about $45


Adam
 
Adam. Thanks for the walker part #. I will verify the input and output pipe diameters and order one, if it's correct, otherwise I will make a trip to NAPA.

Sent from my LM-V405 using Tapatalk
 
Rick, This drawing of original muffler might help you.
 

Attachments

  • correct pass muffler Rev 1-27-22.jpg
    correct pass muffler Rev 1-27-22.jpg
    41.6 KB · Views: 40
You must log in or register to reply here.
Back
Top