Mercury hubcap identification?
- Thread starter Strick
- Start date
petehoovie
Well-known member
34fivewindow
Senior Member
I am thinking 41 merc
mercman from oz
Well-known member
Yes, the Hubcap in question is for the 1941 Mercury. In the above photo, you can see two different manufacturing processes. Refer to the back of them and see the differences. The one on the left is one piece, while the one on the right has a pressed in metal section, which rusts. In Australia, our 1946-1948 Ford Hubcaps were all one piece. Did the USA get the one piece hubcaps or do they all have that added metal section? What to readers think?
mercman from oz
Well-known member
Here is a close up picture showing the two different manufacturing processes. You can see the rust starting on the hubcap on the right on the added metal piece. Were both styles available in the USA?
mercman from oz
Well-known member
I have been collecting FoMoCo Hubcaps now for many years. I just collect a nice example of each year and model. When I saw that these two were different on the inside, I naturally kept both. What is unique with these two 1941 Mercury Hubcaps is that they are both painted in Military Olive Drab. From this, I believe that the vehicles that they came off served in Military Service. I could remove the paint and buff them up, but at this stage, I am leaving them as is.
V8COOPMAN
Well-known member
Now wait a minute, Trevor! Do I need thicker glasses? From up here on the "TOP" end of the Earth, the painted cap in the first picture is NOT THE SAME as the caps that you (mercman "down under") just posted up above. The HORIZONTAL LINES run differently between the two. Or......DO I need thicker glasses? DD
Lawson Cox
Well-known member
V8coopman. Isn't that a 39 hubcap? My memory fades.
rockfla
Well-known member
No sir, Lawson!! The 39 was a SS cap swagged on to a steel shell cap!!!
Attachments
Strick
Well-known member
I posted the inside of the cap a couple posts above. Thanks for everyone’s input this far
mercman from oz
Well-known member
Early and Late 1939 Mercury Hubcaps. When the 1939 Mercury was first released in late 1938, it was actually labelled as a Ford Mercury. However, the powers to be at Ford thought that it should be a stand alone make.
Now that I have my glasses on, the Hubcap in question does have the same design as the revised 1939 Mercury Hubcap, but it appears that it is a small "dog dish" hubcap, whereas, the 1939 Mercury has a centre piece that attaches to a larger base to fit the "wide five" bolt pattern. So the question still remains - what is that mystery Mercury Hubcap?
mercman from oz
Well-known member
Updated 1939 standard Mercury Hubcap (right) with the Accessory full Stainless Steel version (left).
mercman from oz
Well-known member
While the pattern of the Mercury script on this mystery hubcap is the same as the 1939 Mercury, this hubcap is obviously a "dog dish" hubcap and not applicable to the "skin" used on the 1939 Mercury Hubcaps. So the question still remains, what is this mystery hubcap? Maybe, it is an "after market" product?