Parking brake

[miniceptor86]

Hi,
The parking brake on my ‘39 standard will not catch when pulled out. Would someone post a photo of the top side of the handle. Mine has a small plate with a flat spring attached with a hose clamp and it works, remove the hose clamp and the spring and it won’t catch.

I have photos but the site won’t upload them.

 

[19Fordy]

Let me know if 1939 is the same as the 1940 DeLuxe. If so, I will post lots of E-brake photos showing it's assembly. Here's a start.

 

[V8COOPMAN]

Hi,
The parking brake on my ‘39 standard will not catch when pulled out. Would someone post a photo of the top side of the handle. Mine has a small plate with a flat spring attached with a hose clamp and it works, remove the hose clamp and the spring and it won’t catch.

I have photos but the site won’t upload them.

E-mail your photos to me at the link below and I'll post them for you. DD

roundmotor@outlook.com

 

[TerryOH]

Sounds like the hand brake paw spring has broken. 91A-2788

 

[TerryOH]

Sounds like 91A-2788 hand brake paw spring is broken.

 

[Mart]

Not to be picky but I believe the correct term is pawl.

Mart.

 

[19Fordy]

I can't see where that spring goes on my 40. Is it hidden inside?

Does it actuate the metal "pawl" shown in 2nd photo?

I have the feeling that the small clevis pin with the small cotter pin goes thru that spring and that it rides on that pin.

 

[miniceptor86]

Thanks for all the replies. Those of you who said pawl spring are correct. Now to make the repair.

 

[19Fordy]

Take photos as you disassemble and before things fly apart.

 

[Fred A]

It is quite common for that spring to be broken. I made a spring out of spring wire and some heat. Not a great solution, nothing like the original. Who makes them? Good Luck: Fred A

 

[BillW810]

It is quite common for that spring to be broken. I made a spring out of spring wire and some heat. Not a great solution, nothing like the original. Who makes them? Good Luck: Fred A

Macs has them probably others. A well stocked local hardware probably hS something that would work with some creative bending. Easier if you have some of the old spring to match though

 

[BillW810]

I can't see where that spring goes on my 40. Is it hidden inside?

Does it actuate the metal "pawl" shown in 2nd photo?

I have the feeling that the small clevis pin with the small cotter pin goes thru that spring and that it rides on that pin.

If the picture loads the pin/bolt that mounts the pawl goes through the spring inside the parking brake. The short end of the spring goes against the pawl the long end goes to a "tab" cut out of the parking brake "mount".

 

[19Fordy]

Bill, thanks for posting that photo.