hub face to hub face on 46 ford

rich b said:
My list says 61"
Click to expand...


Mine says the same! DD


1928-1931 57.0″ Spring Mount Eye to Eye 49.5″

1932-1934 57.75″ --------------------------- 47.5″

1935-1936 59.5″ ----------------------------48.25″

1937-1940 59.5″ -----------------------------48.5″


1941 59.5"-------------------------------------46.75"

1942-1948 61.0″ -----------------------------46.75"
 
Last edited:
HOTRODRON said:
what is the measurement from hub to hub on a 1946 ford rear end
Click to expand...

Hey you should drive up to Yreka, CA and I will give you a 46 rear end, rear spring, front axle and front wish bone. Free I am moving and cannot bear to scrap it
 
:Djeez louise, gotta teach these green horns everything! hub face, as in axle flange face where the drum & wheel mount, no springs involved. there was a thread recently with an old magazine article with all the banjo axle widths, sorry gary, its late, and i'm too lazy to look it up for you, but you get the idea. hows the busted hand doing? hows the diesel doing?
 
cas3 said:
:Djeez louise, gotta teach these green horns everything! hub face, as in axle flange face where the drum & wheel mount, no springs involved. there was a thread recently with an old magazine article with all the banjo axle widths, sorry gary, its late, and i'm too lazy to look it up for you, but you get the idea. hows the busted hand doing? hows the diesel doing?
Click to expand...

My mistake! I read coopman's list wrong. The spring eye dimension was on the far right and hub face was on the left. Now I see it. I have swapped out a lot of axles, including spending last weekend swapping the complete rear axle in my 92 f350 cab and chassis dually with one from a wrecking yard. You can't believe how few guys on the phone knew anything about axle widths between the dually cc and the super wide dually pickup, or the srw and drw versions. Sheesh. Hands are healed, diesel is awful loud in the cab, And Coopman, I apologize for doubting the info on your list.
 
cas3 said:
:Djeez louise, gotta teach these green horns everything! hub face, as in axle flange face where the drum & wheel mount, no springs involved. there was a thread recently with an old magazine article with all the banjo axle widths, sorry gary, its late, and i'm too lazy to look it up for you, but you get the idea. hows the busted hand doing? hows the diesel doing?
Click to expand...

Question has already been answered, so this is a bit late, but believe these may be pages you were referring to. (not easy to read).
 

Attachments

  • Fordrerx.jpg
    Fordrerx.jpg
    59.8 KB · Views: 25
  • Fordrer2.jpg
    Fordrer2.jpg
    48.6 KB · Views: 27
  • Fordrer3.jpg
    Fordrer3.jpg
    46.1 KB · Views: 24
  • Fordrerx3.jpg
    Fordrerx3.jpg
    44 KB · Views: 21
Not sure why, but the StreetRodder article measurements are slightly different from the ones V8Coopman posted. Would guess it has to do with how you take the measurements. Here are the SR numbers if you can't read the chart in the scan.

The numbers are year(s)/Backing Plate Width/Outside Width/Spring Hanger Width

35-36 / 51.25 / 59.25 / 48.50
37-40 / 51.25 / 59.25 / 48.50
41 / 51.25 / 59.25 / 46.75
42-48 / 53.00 /61.00 / 46.75
 
You must log in or register to reply here.
Back
Top