Some Questions........

TJ said:
This is a fun project to watch. Especially seeing a relative "newbie" working on a family project. Kudos to Ian for taking us along for the "ride" and hope it inspires others to tackle a project.
Click to expand...


Thanks TJ! Hope you enjoy it! Im looking forward to things coming together...I do hope it inspires some people to get going on their projects. If i can can successfully complete this without having a car to take apart, then anyone on here should be able to do it...With that said, until it drives its not done...

I feel i can paint, do some general auto work, like, replace axle seals in a pickup, change a caliper, water pump, front hubs. I do have experience working on my own cars at home. I have tons of experience painting in the commercial industries though. That i feel is my strongest area...
 
Regarding the firewall seal, I ran into all kinds of trouble with my repro seal. They are all too thick! See this post by me and the subsequent posts in this thread which David and rbullockV8 helped me with.

https://www.fordbarn.com/forum/showpost.php?p=1395733&postcount=19

Regarding the firewall holes, see this page of Drake's and click on "click for larger image"

https://www.bobdrake.com/FordItem.aspx?Item=B-700731


Glenn


DavidG said:
Nick,


Regarding your question number 4, the cowl to firewall rubber extended down to the ends of the flanges on the firewall. What is shown in your photos is a reproduction that bears little resemblance to the original and you have it backwards in your photos. The raised part is meant to be positioned forward, not rearward. Even positioned correctly I doubt that you will be pleased with it.

As for the various firewall grommets and plugs, one of the appendices of the book (A-13) is devoted to that subject. They are all pictured and their specific locations are cited.


Charlie,

Large fleet customers could (and did) specify non-standard colors, including for chassis components, for their vehicles like Lincolns of the period offered on all their vehicles. While a bit of stretch that a fleet ordered a roadster with a non-black frame, it is a theoretical possibility. Given the nature of this project, it is owner's choice and moot.
Click to expand...
 
glennpm said:
Regarding the firewall seal, I ran into all kinds of trouble with my repro seal. They are all too thick! See this post by me and the subsequent posts in this thread which David and rbullockV8 helped me with.

Glenn
Click to expand...


Glenn, what was your final way to rectify this?
 
You must log in or register to reply here.
Back
Top