Help in identifying some early V8 parts

[HRCTom]

I acquired these as part of a pile o' parts deal and was hoping that someone on here with smarts can tell me what model year these are from. Thanks in advance.

 

[Randy in ca]

The steering column bracket with the switch appears 1940-47 pickup

 

[deuce lover]

The other steering column bracket below it is '40 pass car

 

[Mike in Mass]

The one with the switch looks exactly like my 39 picup column drop

 

[HRCTom]

Thanks gentlemen ! I appreciate it.

 

[HRCTom]

Just in case someone's interested, the u-bolt plate (top left in pic) is 1932-34. Not sure about the u-bolts yet.

 

[DavidG]

The squared off u-bolt with the nipple on the inside of the U is for a '32-'34 rear spring.

 

[HRCTom]

The squared off u-bolt with the nipple on the inside of the U is for a '32-'34 rear spring.

David G, thank you ! Is the bracket also '32-'34? And wouldn't there be 2 each of these for the rear spring ?

 

[JSeery]

The one on the u-bolt is on upside down if you are interested in that.

 

[DavidG]

The flat piece with the oval hole in the center and four round holes on the corners fits under the front spring on 1932-34 Fords and is used in conjunction with the two rounded U-bolts. Yes, two of the squared-off U-bolts are required for the rear spring.

 

[cas3]

the oval hole is for the rubber bumper stopper thing to mount in

 

[HRCTom]

Many thanks ! Are the 2 'squared' u-bolts for '32-'34 as well?