Need strange lower distributor cap ID

pgerhardt

Well-known member
During the winter, when it is too cold to work in the garage, I enjoy restoring model A parts in the comfort of my warm basement workshop. So I picked up this "lot" of distributor caps for 20 bucks on E-bay to play with. (picture 1) One of them was strange. It had very large brass connectors on the "wings". (pictures 2-3) They look too big for the brass ribbon connectors that serve as plug wires on the model A. I am thinking it might be for a model A tractor using more modern plug wires? Any ideas on what this is?
 

Attachments

  • Screen Shot 2019-02-19 at 12.03.57 PM.jpg
    Screen Shot 2019-02-19 at 12.03.57 PM.jpg
    46.7 KB · Views: 186
  • Screen Shot 2019-02-19 at 12.04.18 PM.jpg
    Screen Shot 2019-02-19 at 12.04.18 PM.jpg
    49.8 KB · Views: 183
  • Screen Shot 2019-02-19 at 12.04.44 PM.jpg
    Screen Shot 2019-02-19 at 12.04.44 PM.jpg
    25.7 KB · Views: 161
After market. Looks like the terminals screw off for better connection or could use modern style wires. I am not aware of any Ford tractor that used this style cap/body. Nice collection.
 
I'm with Ray in La Mesa on this one. I run across this conversion occasionally. The threaded spark plug terminal are often twisted on very tightly with a pliers and may appear as though the cap was made that way.
 
They look like the cap that came with my Miller OHV setup, because it has a different plug spacing. I junked it because I used a Mallory distributor or I would post a picture. The cap by Renners corner looks like a modern distributor cap.
 
They look like the cap that came with my Miller OHV setup, because it has a different plug spacing. I junked it because I used a Mallory distributor or I would post a picture. The cap by Renners corner looks like a modern distributor cap.

The one I bought from Renner's Corner, the one that is on my engine right now, is just like the one Bob shows above.

Description from their page: https://www.rennerscorner.com/cap--wire-sets.html
RC-12105-M
Description: DISTRIBUTER WING BODY - COVER - ROTOR
Comments: Wing body modified for 7mm plug wires
Application: 1928 - 34 4-cyl
 
Last edited:
Back
Top