Rear Seat

1

1930deluxe

Senior Member
1930 Tudor sedan rear seat question. What is missing the seat I have does not have brackets to attach the seat to the body?
 
1930deluxe said:
1930 Tudor sedan rear seat question. What is missing the seat I have does not have brackets to attach the seat to the body?
Click to expand...

You're missing the brackets. :D

Seriously, if you can post a picture of what you have, it would help.

The bottom cushion is not attached to the body. It slides in under the back cushion and is held in tension by the lower platform.

The upper cushion has 2 metal tabs on the wood frame that slide into slits in the structure supporting the rear panel.

Here are the tabs...

13113-600x800.jpg


https://modelastore.com/index.php?route=product/product&product_id=13113&search=seat+frame&category_id=0
 
Last edited:
The lower seat cushion has two metal brackets that are attached to the front of the seat cushion wood fame and seat in just behind the seat riser thus preventing the cushion from sliding forward
 
I will take a photo with a different camera and post it. For some reason it will not up load the picture from my cell phone. I will post one tonight.
 
I have attached photos of the seat that I have. I am not sure it is a complete seat. I think there should be a wood frame on the rear of the springs. I was told it is out of a 1928 tudor sedan.
 

Attachments

  • ASeat 001.jpg
    ASeat 001.jpg
    107.6 KB · Views: 375
  • ASeat 002.jpg
    ASeat 002.jpg
    88 KB · Views: 101
  • ASeat 003.jpg
    ASeat 003.jpg
    97.7 KB · Views: 98
  • ASeat 004.jpg
    ASeat 004.jpg
    90.8 KB · Views: 93
  • ASeat 005.jpg
    ASeat 005.jpg
    97.5 KB · Views: 103
How does the back cushion attach to the rear of the vehicle with no wood to attach the bracket? Could you send a picture of yours?
 
1930deluxe said:
How does the back cushion attach to the rear of the vehicle with no wood to attach the bracket? Could you send a picture of yours?
Click to expand...

There is two hooks on the inside of the body and the top of the spring wires clip into these hooks. I will try to get a photo later.
 
Here is the backrest wood that all our vendors sell for 28-31 Model A Tudors...

5897-600x800.jpg


Here's the picture of a Model A Tudor rear seat I posted on the OP's other thread on the same subject...

29043185316_b8747b66c9_c.jpg


Here's the seat back the OP has...

381745


They look different to me. The upholstery on the OP's covers some of the wood which makes identifying it tough, but the outside 2 vertical wood pieces on the top one should show on the bottom one and they don't.

I'd try a test fit in the Tudor. I could be wrong, or someone may have modified another seat to fit in a Tudor.
 
Interesting. I'm stumped. When I redid my Tudor this time last year the frame is identical to what Dick has posted. I don't recall ever seeing the "loop" retainers or the taper on the slats. Is it possible this is a Canadian built car. There were differences as well all know.
 
The seat I have does not have any wood at the top just open spring frame and the material is hog ringed to the spring framing. So if this was an early 1928 seat they may have been different than the 30-31? Midgetracer said his seat looks just like mine.
 
Last edited:
1930deluxe said:
The seat I have does not have any wood at the top just open spring frame and the material is hog ringed to the spring framing. So if this was an early 1928 seat they may have been different than the 30-31? Midgetracer said his seat looks just like mine.
Click to expand...

Dang! someone has the answer. Just checked some of my books with no luck. I'm still thinkin Canadian or perhaps Phaeton rear seat backrest. Can't wait to hear more from Midgetracer.
 
Attached are the pictures I promised. My car is a 29 Tudor made in the Twin Cities. It is always been together and I am sure the wood and hooks are original. Hooks are as pictured earlier and are screwed to the wood below the window sides.
 

Attachments

  • Seat back.jpg
    Seat back.jpg
    67.4 KB · Views: 113
  • seat hook.jpg
    seat hook.jpg
    24.9 KB · Views: 108
The wire that the upholstery is hog ringed to slides over the hooks. I have a second Tudor that has the same wood. NO top wood, only the wood as shown in my pictures.
 
You must log in or register to reply here.
Back
Top