Seat riser anti-squeak material

C

Carbroke

Member
Just removed the seat riser off the floor of the truch to straighten/weld it back to normal. Under the lip that contacts the floor pans is a very thin material of some kind.

Surmise it was for anti-squeak, and after looking for it on-line, can't find anything like it. 1/16 welting is too thick.

Anyone know or have ideas?
 
On my 46 coupe there is a material between the inner fender and fender that looks like Friction tape or as we use to call it Tar Tape. Would that work?
 
Carbroke said:
Just removed the seat riser off the floor of the truch to straighten/weld it back to normal. Under the lip that contacts the floor pans is a very thin material of some kind.

Surmise it was for anti-squeak, and after looking for it on-line, can't find anything like it. 1/16 welting is too thick.

Anyone know or have ideas?
Click to expand...

The stuff you have witnessed is canvas. A VERY similar product can be purchased at any fabric store. It is called "duck cloth" - seriously.
I use Duck cloth where authentically required in all of my restorations.

You can buy this by the foot x 54" wide for about $2.50.
 
You must log in or register to reply here.
Back
Top