28 model a fordor steering column support

N

Njglide

Junior Member
Can someone please post pictures of 31 style steering column support installed on 28-29.
Need to see attachment to dash.
Thank you
 
Here you go. This was posted earlier.

Bob
 

Attachments

  • Steeringproject005a.jpg
    Steeringproject005a.jpg
    117.5 KB · Views: 93
I've seen some NIFTY ones, made from just the right size connecting rods. They attract a LOT of ATTENTION for us INSECURE FOLKS---LOL
We're ALL insecure, some just don't ADMIT it & we're ALL just CHILDREN, in OLD Skins---LOL
Bill Child
 
Go to the web site of the Santa Anita A's of Arcadia California. On the home page under 'Tech Articles" - Tom Endy, there is a series of technical articles. Scroll to the one that addresses this subject. There are photos and a complete description on how fabricate and install the adapter bracket. The later needed parts can be obtained from Bratton's. The article is in a PDF file and you are welcome to down load it and print it out and save it.
www.santaanitaas.org

Tom Endy
 
One moment. The 60A and 60B, and most likely 60C have a wood cross beam under the dash panel, not a sheet metal cross piece. I'll be trying to fab a support for my sedan and I am just pointing out that these bodies are different and not a bolt on situation. Actually, the very early sedan even has a different wood cross-member and dash cover panel than the later 28 and 29 cars.
 
That's exactly the problem. That wood support is in the way and makes installing the later style support a big job.
 
You must log in or register to reply here.
Back
Top