'32 Ford Front Fender Bolt\Screw Die

[Zeke32]

Does anyone make a Die to put the raised area on the fender, around the bolt holes that goes thru to the front frame horn??.....thx

 

[BillM]

After making a die for myself I was told that the dimples are reproduced for Model A's.
See http://www.snydersantiqueauto.com/steel-fenders

 

[Karl Wescott]

Years ago my father adapted a pipe union for a die for the dimple... sorry dont know what size he used.

 

[jerseyboy]

I got this from a thread on the HAMB. Not sure if all the info. is up to date, but you can give it a try.

32 Fender Patch

Frank Borowitz
Premier Frame & Body
3029 W. Clarendon Phoenix, AZ. 85017 602-248-0812

He also makes patches for the front fenders of a 32 where screws go though to the frame in front

Keep V-8ing and 4-banging!

 

[fourtydlx]

I got this from a thread on the HAMB. Not sure if all the info. is up to date, but you can give it a try.

32 Fender Patch

Frank Borowitz
Premier Frame & Body
3029 W. Clarendon Phoenix, AZ. 85017 602-248-0812

He also makes patches for the front fenders of a 32 where screws go though to the frame in front

Keep V-8ing and 4-banging!

Frank makes anything,Good Man

 

[Zeke32]

Thanks for the lead on Frank Borowitz. I called today, but the phone was disconnected.

 

[jerseyboy]

Zeke,

Try this number: (602) 267-1319

Keep V-8ing and 4-banging!

 

[va t]

If you know someone with a metal lathe it is not difficult to make a pair of dies having a thru-bolt to pull them together. Receiver die on top, pusher below--make them out of scrap mild steel. Slick solution.