'36 4dr. Doors to Roadster?

brigrat

brigrat

Senior Member
Starting with '36 Ford 4 Dr. doors and needing pic's of the inside shot of a roadster door to see location of latch mechanism and curve at top inside. Nother words I want to convert the 4dr. to as close to a Roadster door as possible. Got pic's? Thanks!
dscf7623-jpg.3421624
dscf7622-jpg.3421625
dscf7623-jpg.3421624
dscf7622-jpg.3421625
dscf7623-jpg.3421624
dscf7622-jpg.3421625
 
Last edited:
Brigat, Here are some roadster doors showing interiors. Keep in mind that door latching mechanisms are very different. Hope this helps.

Don
 

Attachments

  • Road door 01.jpg
    Road door 01.jpg
    212.1 KB · Views: 111
  • Road door 02.jpg
    Road door 02.jpg
    195.8 KB · Views: 89
  • Road door 03.jpg
    Road door 03.jpg
    215.7 KB · Views: 91
Don, That's exactly what I needed, I can make it happen! Thanks & sorry for the duplicate pi's. Can't seem to delete thread and start over or delete double pics. Thanks again Don!
 
Last edited:
where are you located??...might be someone close with roadster you can take measurements, etc....good luck...Mike
 
Brigat, Some more pics of '36 roadster doors and their bracing.
I have wood patterns if needed. Gnolnor
 

Attachments

  • IMG_0240 (1).jpg
    IMG_0240 (1).jpg
    52.5 KB · Views: 48
  • IMG_0250.jpg
    IMG_0250.jpg
    50.6 KB · Views: 38
  • IMG_2745.jpg
    IMG_2745.jpg
    59.3 KB · Views: 37
Those are also great pic's Gnolnor !
Let me be real clear on what I am doing at the risk of losing your interest & help. I am the first to call this project a "Wanna Be" '36 Ford Roadster. Took a '36 Ford 4 dr. and with the help of others more talented trans gendering it to a Roadster. My goal is to have it look like a '36 Roadster BUT because of engine, trans, QC choices not all is FB friendly. The outside of doors have already been altered, just trying to figure out how I want the latching to work. If still with me here maybe I can lean on you and Don for some critical measurements as I will be tackling the rear section also? As always thanks to all!
 
I think the problem is I had the same thread started on the HAMB, cut and pasted it here? The thread on the HAMB by me did not show double/triple pic's...........................
 
brigrat said:
Those are also great pic's Gnolnor !
Let me be real clear on what I am doing at the risk of losing your interest & help. I am the first to call this project a "Wanna Be" '36 Ford Roadster. Took a '36 Ford 4 dr. and with the help of others more talented trans gendering it to a Roadster. My goal is to have it look like a '36 Roadster BUT because of engine, trans, QC choices not all is FB friendly. The outside of doors have already been altered, just trying to figure out how I want the latching to work. If still with me here maybe I can lean on you and Don for some critical measurements as I will be tackling the rear section also? As always thanks to all!
Click to expand...

Is there a build thread somewhere?

Thanks Kevin
 
You must log in or register to reply here.
Back
Top