1936 Truck restoration

1stford

1stford

Senior Member
My grandfather had a restoration shop in California and he worked on late 30 and 40 ford and Mercury's. This 1936 Ford truck was his shop truck, bought by him in 1961. This truck is the truck my mom learned to drive on. About 20-25 years ago He took this truck apart and it sat there. Last year he got sick and gave me as many pieces to the truck he could find. Im taking it down to the bare frame and making it a truck that hopefully I will teach my girls to drive on. I know not much about early fords but have been finding my way slowly. I will post pics here for help and to show. Any pointers or thoughts would be appreciated.
Thanks



 
Your grandfather produced fine work. I hope you paid close attention and inherited his
skills.
If you post your general address everyone here on the barn can bid you welcome as I have.
Probably some are close and be able to assist you better.
Bruce
 
I'm trying to get my pictures all up. I needed to rebuild the trans and motor. By my estimate and research it appears the transmission is a 36 model and the engine is from a 49. heads marked as 8BA. Thinking I might need to change out the spark plug wires for the original look?
 
The truck looks nice to begin with and appears to be a pretty solid piece for restoration.
The transmission looks more like a '39 to me, or it could be a '35-'36 case with '39-'48 gears, and '39 style shifter top/tower. If you check the serial number on the flat area above the clutch inspection plate, that would tell which year and month the case was used in production. There is also a casting part number on the back of the case that will tell which year(s) it was used in production.
Welcome to Fordbarn
 
VERY nice '36. You have a really nice pickup to start with, and thank you for doing it stock and not chopping up and cobbling this fine example all to heck;)
 
Man n n that's one beautiful truck, look at all the patina on the bed, just keep it like Jeff says, I am glad your not monkeying with it ,Ted
 
Last edited:
Jeff/Illinois said:
VERY nice '36. You have a really nice pickup to start with, and thank you for doing it stock and not chopping up and cobbling this fine example all to heck;)
Click to expand...

When I picked up the truck gramps "suggested" that it stay stock. He said that there are plenty of fords with small blocks floating around. I'm doing my best to keep it original.
 
That thing looks GREAT! Congrats! Lots of help here for just about any questions you may have.
 
Good project. Always a worthy task to get a legacy truck back on the road - especially in close to original condition. Enjoy the ride.
 
Are there in general torque specs or a book that has chassis torque specs for my truck. Specifically, now, I'm wondering how tight to get the bolts that hold my front backing plates to the spindle.

Thanks.
Jeremie
 
You must log in or register to reply here.
Back
Top