Rear Wheel bearing

Jerry in Shasta

Jerry in Shasta

Senior Member
Just finished having cast iron brake drums swedged on the hubs. As part of the reinstall. I pumped grease thru the rear bearing zerk, the grease came out between end of the axle housing and the axle, this correct? I had to give it 6 pumps to get the grease to come out.

I plan on packing the bearing with wheel bearing grease the same way I do the front wheel bearings.

Any thing else I need to do, or am I doing some thing wrong

JB
 
You are better off packing those bearings by hand as any excess passes the axle seal and goes into the axle housing "trumpet" I have disassembled many differentials where there was evidence of this happening.
 
With excess grease, your rear wheel brake shoes could probably always be extremely quiet when they contact the rear brake drums; could possibly never wear; and as such may last forever.
 
H. L. Chauvin said:
With excess grease, your rear wheel brake shoes could probably always be extremely quiet when they contact the rear brake drums; could possibly never wear; and as such may last forever.
Click to expand...

MMM, great idea. I think I will put a zerk on the front brakes too.:p
 
You must log in or register to reply here.
Back
Top