need a machine shop near Alabma

T

tudor87

Member
After 30 years in the military my wife and I retired around Tuscaloosa AL and we began the restoration of our 31 Canadian built Tudor, I have completed most of the chassis work but need a good engine/machine shop. I have to get some line boring done on relatively good babbitt. Any help would be greatly appreciated. I will be going to Tucker Georgia swap meet next weekend. Thank You
 
Thanks Bob that may be the closest. been dragging this model a around the USA long enough, time to get it finished.

Gary
 
Gary, there's a good one in Newnan,GA. Robert Carden, Cardens Machine. Phone 770-251-9174 cell 678-613-0516. Address is 170 Smith Road, Newnam, GA. 30263 I am in a large model a club in Montgomery and a lot of our mambers use Carden. My email is ron36109@aol.com. If you need further help. Ron
 
ron103140 said:
Gary, there's a good one in Newnan,GA. Robert Carden, Cardens Machine. Phone 770-251-9174 cell 678-613-0516. Address is 170 Smith Road, Newnam, GA. 30263 I am in a large model a club in Montgomery and a lot of our mambers use Carden. My email is ron36109@aol.com. If you need further help. Ron
Click to expand...

A friend of mine from here in Panama City, FL, took the engine from his 30 Coupe to Carden last month. He was very impressed.
Robert%20Cardin%201_zpsxyoogfz2.jpg

Robert%20Cardin%202_zpsyhr48vlh.jpg
 
I always worry about craftsmen that stay that clean!😜
(I've heard good things about carden but never had an
occasion to use them)
 
Benny Bohannon in Maysville, Ga is a great source for all type of Model A restoration. He not only does restoration by rebuilds engines. Located next to Mikes Affordable Parts store.
 
Thank you one and all for the reply to finding a machine shop I will get on the phone Monday. Great hobby with outstanding people.

Gary
 
You must log in or register to reply here.
Back
Top