dmaxweb Well-known member Dec 23, 2010 #1 I need to replace the gaskets on the windshield frame and hinge. Which screws do I remove to take the windshield off the car? Thanks
I need to replace the gaskets on the windshield frame and hinge. Which screws do I remove to take the windshield off the car? Thanks
brum1 Well-known member Dec 23, 2010 #2 I have recently removed the windshield on my 30; Open the windshield and you will see the wood screws through the piano hinge which runs the top length of the windshield. (should be 9 or 10); Good luck,
I have recently removed the windshield on my 30; Open the windshield and you will see the wood screws through the piano hinge which runs the top length of the windshield. (should be 9 or 10); Good luck,
dmaxweb Well-known member Dec 23, 2010 #3 Are these the screws through the hinge and into the windshield frame or the screws through the hinge into the header?
Are these the screws through the hinge and into the windshield frame or the screws through the hinge into the header?
LukeDahlinger BANNED Dec 23, 2010 #4 Screws into the header. If you take the swing arms off you can get to the screws alot easier.
dmaxweb Well-known member Dec 23, 2010 #5 LukeDahlinger said: Screws into the header. If you take the swing arms off you can get to the screws alot easier. Click to expand... Is the header wood?
LukeDahlinger said: Screws into the header. If you take the swing arms off you can get to the screws alot easier. Click to expand... Is the header wood?
brum1 Well-known member Dec 23, 2010 #7 Header is wood, covered by sheet metal, screws go through hinge, rubber gasket, sheet metal header cover and into header, Hope this helps,
Header is wood, covered by sheet metal, screws go through hinge, rubber gasket, sheet metal header cover and into header, Hope this helps,
Tom Wesenberg Well-known member Dec 23, 2010 #8 Lay a blanket on the hood and gas tank in case the winshield drops. Best to have a friend help with this job.
Lay a blanket on the hood and gas tank in case the winshield drops. Best to have a friend help with this job.
dmaxweb Well-known member Dec 23, 2010 #9 Thanks for the info. The wind noise is keeping me awake while I'm driving
glenn in camino Well-known member Dec 23, 2010 #10 I usually roll up a blanket to hold the windshield wide open while I remove the screws in the header. A second set of hands will help.
I usually roll up a blanket to hold the windshield wide open while I remove the screws in the header. A second set of hands will help.
S sonny30coupe Senior Member Dec 23, 2010 #11 Removing it is the easy part, taking the frame apart is where the fun begins.