1932 model B Rear Axle hookup to v8?

Moodswing83

Moodswing83

Junior Member
I am looking at a 1932 model b rear axle for my project. The plan is to connect it up to a 1946 flathead-8/39 trannie. The question is, will it be capable of supporting a medium built flattie that will be driven lightly?

Any information will be appreciated.

Gene
 
I posted this on the A site because I am using an A chassis.

The reason for the 32 rear is a 1925 tudor body on a A chassis. The 32 rear is believed to be the narrowist width for the t-body. Of course my original thought was a 32 v8 rear.

Any information will be appreciated.

Gene
 
There are a lot of Model A's being driven with that engine so I think it should be capable. The '32 is basically a Model A rear end (unless you have the late one which is slightly stronger). Remember to run brake drum retaining clips or safety hubs (I would also give the same advice to someone running a stock Model A or B).

First question, why not just run a Model A rear end? Second if you mean a late '32 rear end I think you will have trouble finding one. They are talked about a lot but what is left out is that they are EXTREMELY rare. Most of the V8's in 1932 used the Model B rear end. Only a small number of cars late in the production used what is generally referred to as the V8 rear. I have been into '32's for years and only seen a couple of these rear ends.

Charlie Stephens
 
Last edited:
32 rears used different curved springs and the spring was not over the axle like an A. You can make anything work, but it will take some engineering.
 
I want to thank all of you for the information. I already have a '32 axle in my possession. I don't think that I will use it for this project because I do plan on building the motor for a little abuse. Most recommendations state that this probably would not be the axle of choice.

Thanks to all. This web site is awesome because of you guys.

Gene
 
Charlie Stephens said:
There are a lot of Model A's being driven with that engine so I think it should be capable. The '32 is basically a Model A rear end (unless you have the late one which is slightly stronger). Remember to run brake drum retaining clips or safety hubs (I would also give the same advice to someone running a stock Model A or B).

First question, why not just run a Model A rear end? Second if you mean a late '32 rear end I think you will have trouble finding one. They are talked about a lot but what is left out is that they are EXTREMELY rare. Most of the V8's in 1932 used the Model B rear end. Only a small number of cars late in the production used what is generally referred to as the V8 rear. I have been into '32's for years and only seen a couple of these rear ends.

Charlie Stephens
Click to expand...

How could that rear be identified? I may have one.
 
Originally Posted by Charlie Stephens
There are a lot of Model A's being driven with that engine so I think it should be capable. The '32 is basically a Model A rear end (unless you have the late one which is slightly stronger). Remember to run brake drum retaining clips or safety hubs (I would also give the same advice to someone running a stock Model A or B).

First question, why not just run a Model A rear end? Second if you mean a late '32 rear end I think you will have trouble finding one. They are talked about a lot but what is left out is that they are EXTREMELY rare. Most of the V8's in 1932 used the Model B rear end. Only a small number of cars late in the production used what is generally referred to as the V8 rear. I have been into '32's for years and only seen a couple of these rear ends.

Charlie Stephens

How could that rear be identified? I may have one.



James,

Wish I could be helpful but I don't know the details. The only thing I know is that you will find the scalloped area (not round like Model A and most of 1932) on the front of the center section where the torque tube bolts on (this is true late '32 through '48). It was very late in 1932 and sort of a transition to 1933. You might post your question at earlyfordv8.org. Dave Rehor posts there and he would definitely know as he has both the '32's and '33's.

Charlie Stephens
 
Last edited:
You must log in or register to reply here.
Back
Top