'33 pickup box detail. Picture request Please

[Flowmeister]

Does anyone have, or could someone take a picture or two of the rear spreader bar from a 33/34 pickup., Specifically the box support bracket part.
Mine is missing, so i'd like a good example of what I need to replicate.
Unable to find a good picture on the internet.
Thank you for any help!

 

[Flowmeister]

Still hoping someone might help me out with this.
Thanks

 

[2ndgeer]

I searched through my pickup photo files and came up with a couple of pictures that show the rear crossmember and how it is mounted under the pickup box. Hope these help.

 

[2ndgeer]

It occurred to me that maybe I should add another picture. When my '34 was rebuilt by Limeworks I wanted them to include the "doubler" that mounts to the outside of the frame at the rear. It strengthens the rear spreader setup. Here is the picture of the stainless (not stock) doubler they installed during the rebuild.

 

[Flowmeister]

It occurred to me that maybe I should add another picture. When my '34 was rebuilt by Limeworks I wanted them to include the "doubler" that mounts to the outside of the frame at the rear. It strengthens the rear spreader setup. Here is the picture of the stainless (not stock) doubler they installed during the rebuild.

That's perfect! Thank you very much 2ndgeer!