Re-Blueing Spark Plug Bases

F

figment

Senior Member
Can anyone recommend someone that still does the actual blueing on the spark plug iron bases?( not the blacking that is mostly done now. ) Thanks , Norm
 
Thanks , I may have to do that. I was looking for the process called hot blueing that was the original finish on early spark plugs. It does hold up better than the cold process as I am told. I had someone in Grand Rapids Mi. some time back but he has passed away. Norm
 
There are gun shops that still do hot blueing, but it cost considerably more than cold blueing. I stripped the rust off my Remington Model 41 Targetmaster and used G-96 cold blueing. It did a very nice job. I rubbed it down with ATF as soon as I rinsed off the blueing. I used my Milwaukee heat gun to preheat the gun parts before I applied the blueing.
 
Tom Wesenberg said:
There are gun shops that still do hot blueing, but it cost considerably more than cold blueing. I stripped the rust off my Remington Model 41 Targetmaster and used G-96 cold blueing. It did a very nice job. I rubbed it down with ATF as soon as I rinsed off the blueing. I used my Milwaukee heat gun to preheat the gun parts before I applied the blueing.
Click to expand...
I, also, have a Remington Model 41 Targetmaster, from the '30's. In the mid 50's, I stripped it down, polished ALL the parts & blued it myself, in a HOT Commercial Blueing tank & it still looks NEW!
Bill W.
 
cold bluing will give a black appearance i like it on the guns i have done but its not blue. brownells sells hot blueing salts. but only in large expensive jugs. like 150 dollars. since plugs are small it would be an easy project. do it outside because of fumes. but since they are small and your not going for presentation gun quality blue. i would think you could send it out and have them hot blued for a pretty reasonable
price.
 
I've done a lot of Blueing, REMEMBER, It's REALLY HOT, NOXIOUS FUMES, & if you get the salts on your skin, it BURNS & leaves like a BIRTHMARK, that lasts & lasts!
Bill W.
 
There are two different processes, blueing and black oxide. Contact any machine shop to get black oxide done, it's very cheap.
 
I did a google search for gun hot bluing and found some places that do guns. I will contact some and see if they will do some spark plug bases. Thanks , Norm
 
You must log in or register to reply here.
Back
Top