Vintique 39-40 hood arms

36 ford

36 ford

Senior Member
I know that Vintique repro parts are not among the most desirable of replacement parts but what about their hood arms?
Has anyone found them to the exception?

I need some replacements for my 39 Deluxe.

Thanks!

Phil
 
I Bought replacement arms (I have a 39) they work fine. I would strongly recommend you also get the proper bolts. I think they are the real key in the smooth operation of opening and closing the hood
 
Thanks "Leo" I've always enjoyed seeing your coupe in that (Dartmouth?) green color.

I could sure use some photos of your hood underside to compare with what I have. Mine appears to have a number of issues with the arms, hinges and brackets but a picture of a correctly functioning hood would help a lot.

Phil
 
Phil

My car is currently up on the lift. I'm doing some work down under:)

I'd be happy to take a couple pics in a day or two.

Yes you are correct its Dartmouth green
 
The 40 hood arm hinges are the same as 39 deluxes except for the addition of an extra mounting bracket on the bottom which attaches it better to the cowl.
Gives it more stability and a smoother movement.
You just need to drill 2 extra holes on each side.
You can always remove them if you don't wish to use them.
Regards,
Chris.NZ.
 
Last edited:
Thanks Chris, I was wondering about the extra mounting brackets and why there was no place to mount them on the 39. We took Phil's hood and hinges off today and the best I can say is they have certainly been used. Looks like buying replacement hinges and using the extra mounting brackets is the way to go. Bob
 
Are the hinges/arms sold by Bob Drake made for him or are they Vintique in disguise?
I could use some more advice here as I don't like buying inferior quality. Adileo likes his set by Vintique.. How about some others????????
 
36 ford said:
Are the hinges/arms sold by Bob Drake made for him or are they Vintique in disguise?
I could use some more advice here as I don't like buying inferior quality. Adileo likes his set by Vintique.. How about some others????????
Click to expand...

I have a 39 Standard and bought a set of vintique hinges. They do not fit. I put them on the shelf and repaired mine, Thanks to Kube for the info .
 
I know the car hinges are different from the pickup. As to the pickup hinges, use your original hinges no matter how bad they are. Repair them and use the correct bolts. Repos for pickups are not usable. Aligning the hood is almost impossible even when using original hinges. And yes Mike (kube) is the guru on all things '40.
Just an opinion
 
39 standards only have 1 hood support arm mounted on the LH side.
This was because the hood was far lighter than the 39 deluxe one.
It's really only a 39 deluxe LH with 2 bends in the lower arm.
Can't understand why all the vendors sell them as a pair.
 
Last edited:
36 ford said:
Are the hinges/arms sold by Bob Drake made for him or are they Vintique in disguise?
I could use some more advice here as I don't like buying inferior quality. Adileo likes his set by Vintique.. How about some others????????
Click to expand...

I can't answer your question, but I bought Bob Drake's hinges for my '40 deluxe several years ago, and they fit very well. They compared as close as I could measure to several original (very worn and bent/beat up) sets I have. The only issue was that the arms were very "tight", and needed a little break in.
 
swoopNZ said:
39 standards only have 1 hood support arm mounted on the LH side.
This because the hood was far lighter than the 39 deluxe one.
It's really only a 39 deluxe LH with 2 bends in the lower arm.
Can't understand why all the vendors sell them as a pair.
Click to expand...

What you say is true, but i own one with 2.
:)
 
Thanks folks, for your input. I wound up with a combination of Drake's SS brackets and Vintique's SS hinges and springs and SS shoulder bolts. Has to be way better than my rickety originals.

Phil
 
You must log in or register to reply here.
Back
Top