Well, I hope it's ok. I just finished my '30 coupe and I mixed prestone/distilled water (50/50) and put it in, and that was just the other day.
Hope someone knowledgeable chimes in on this too....!![]()
Ok, lol................. Sounds like a 50/50 mix of water and Prestone would be ok then? Our water in Washington state is pretty good, should be ok.Dude...sometimes you gotsta dance with what brung ya. lol I run a Brassworks and part of the guaranty is to run a 50/50 mix. I use Sierra.
You'll be fine with the 50/50 mix........sposta drop even colder tonight, so get it in quick. My coupe is lounging in a heated garage but I have anti freeze in anyway to keep corrosion down.
Went for a boot about 15 clicks up the road to score some chinese food last night.
My Dad was buying so we went to his favorite spot for it.
The old coupe didn't want to start too easy but ran fine @ minus 4 degrees
Canadian. We waited a half hour for the order and she had cooled down already enough to have to choke. I was beechin about how cold it was with no heater and Dad says: " Its fine I am not cold at all" I said "Sure you have a warm box of take out in your lap,why would you be cold?"
I think I'll be looking for a heater at the spring swap meet. BBBBrrrrrrrr.
The only time I wouldn't run antifreeze in a Model A would be if I had a marginal cooling system. If you recall the "specific heat" unit back in your high school chemistry class, you'll remember that the same volume of water can absorb alot more heat than the same volume of alcohol or glycol. So if you are persistantly plagued by overheating, running a 50/50 mix and can't afford a new radiator, then I would try straight water. In all other situations, I see no harm in running a 50/50 mix. Plus you get all the rust prevention additives. I think that in modern pressurized systems a 50/50 mix is better than straight water for cooling purposes (but don't quote me). I would be confident running the 50/50 mix in any antique car with an adequate cooling system.Ive got a cold night ahead of us and all I have is Prestone antifreeze. The 29 coupe is just running water in it and I would like to be able to not worry about cracking a block. I hear antifreeze isn't the best thing for these older rigs?
The only time I wouldn't run antifreeze in a Model A would be if I had a marginal cooling system. If you recall the "specific heat" unit back in your high school chemistry class, you'll remember that the same volume of water can absorb alot more heat than the same volume of alcohol or glycol. So if you are persistantly plagued by overheating, running a 50/50 mix and can't afford a new radiator, then I would try straight water. In all other situations, I see no harm in running a 50/50 mix. Plus you get all the rust prevention additives. I think that in modern pressurized systems a 50/50 mix is better than straight water for cooling purposes (but don't quote me). I would be confident running the 50/50 mix in any antique car with an adequate cooling system.
Hey thank you Sirs. Just drained and flushed. Looks like about a two gallon system? Gallon of Prestone full strength and a little over a gallon of water and ran her for a bit. It never gets below high teens in these parts, should be fine. Noticed right away she didn't warm up as fast, lol.........![]()