installing rear shackles

[white64]

There seems to be two types of shackles available for a 40 ford, the original style and the rubber or poly types...

Which is better?

When removing the old shackles do you also remove the bushings? (bushings = what is left after the spring bolts are driven out...)

 

[40cpe]

Yes, you have to remove the bushings. Most remove enough of the rubber to get a hacksaw blade in the eye. Cut the metal tube that surrounds the old rubber bushing, being careful not to cut into the spring eye. Peel out the old metal.

I guess opinions differ on the best replacement. I have had the poly bushing squeak. I have read where some go to a bearing house and get impregnated bronze flange bearings the same size as the bushings and like them.

 

[white64]

Yes, you have to remove the bushings. Most remove enough of the rubber to get a hacksaw blade in the eye. Cut the metal tube that surrounds the old rubber bushing, being careful not to cut into the spring eye. Peel out the old metal.

I guess opinions differ on the best replacement. I have had the poly bushing squeak. I have read where some go to a bearing house and get impregnated bronze flange bearings the same size as the bushings and like them.

where's the best place to get 'em !?

 

[Andy]

Any bearing supply house. You don't need any longer than the 1". The rear load is less than the front. They go in easier and will last forever. I had to replace my new stock type shackles because the rubber gave up quickly.