Letters, Numbers and codes...

Steve Plucker

Steve Plucker

BANNED
Besides the following letters, numbers and codes used on the Model A/AA Ford, what other codes were used?

1. Engine/frame numbers;
2. Gas tank dates;
3. Assembly plant codes;
4. Rear crossmember/spring stamping codes;
5. Body number codes;
6. Part numbers.

Thanks.

Pluck
 
He may be talking about the tag that is found cast into the side of some transmission cases. I have one here at the house with a tag stamped 10-25. The transmission on the upper left has that tag just in front and slightly above the oil filler plug. It can barely be see in the pic. Rod
 

Attachments

  • IM000945.jpg
    IM000945.jpg
    99.7 KB · Views: 42
"Diamond" Model "A" Engine dated of manufacture embosed (cast as a tag) on the block below valve cover. There is usually a letter, followed by three numbers. The letter signifies the month of manufacture, the first two numbers signify the day of manufacture and the third number signifies the year of manufacture. I have one that has "F245". This block was manufactured (poured) on June 24, 1935. Don/WI
 
Yes I have a 31 transmission which is dated (3-19) with a cast tag on the housing and also some of the internal parts are date stamped with logos. This particullar transmission is well stamped or casted with a "W" in a circle on all the internal parts in additon to dates.
 
I've seen date stamps on the generator armatures and often FORD stamped on also. Some also have a company logo stamped on the armature.
 
You must log in or register to reply here.
Back
Top