1935-37 Pickup, spare tire mount

[Roothawg]

Does anyone have pics of what the piece that attaches from the bedside to the mount looks like? I have several spare tire mounts but all are missing this piece. It should be a few inches long and threaded at least on one end. Not sure about the other end.

Thanks.

Root

 

[Don Rogers]

Root, Here are some photos of 35 and 36 spare tire assemblies along with a sketch that I made of the bolt and tube assembly. I hope that this helps.

Don

 

[Roothawg]

Perfect! Thanks. I thought it was a cast piece. This explains why they are always missing. Don, what catalog did you get that out of?

 

[Don Rogers]

Root, The first image was out of the 1928-36 Chassis Parts Catalogue. The second was my drawing(there is a mistake...nut should be 1/2"- 20). Third and Forth were images from the internet.

 

[Roothawg]

Thanks again Don. Much appreciated.

 

[BlueSunoco]

The '35 is different from the '36 of course as the '36 is running the wide fives. I guess a '37 is the same as a '36 I don't know would have to check the part numbers.

'35's are a bit harder to come by seems like a good number of '36's run later drums w/ the '35 bolt pattern. We do!

 

[Lawson Cox]

Root, The first image was out of the 1928-36 Chassis Parts Catalogue. The second was my drawing(there is a mistake...nut should be 1/2"- 20). Third and Forth were images from the internet (Courtesy of Lawson Cox and Jerry Grayson draft 35-36 Ford Pickup book which is, hopefully,still in the oven..)