Ring carrier dimensions

[Peterooster]

I need to rebuild my B4205 ring gear carrier due to a spun bearing, the bearing size for the shaft is known.I need the size for the part where the bearing face is worn. Pete

 

[Ken/Alabama]

How about what year and car you workin on ? I / we could be of more help knowing a little more .

 

[Kurt in NJ]

I suspect it is model A/32 --I don't know the size, i do have a NOS one, but won't be where it is till the weekend, shim it behind the bearing till you get preload with nominal gasket thickness

 

[Peterooster]

How about what year and car you workin on ? I / we could be of more help knowing a little more .

It is a 1932 the last year for this carrier. Pete

 

[Russ/40]

You know Pete, if you knurl it you can use your existing one. Just have it knurled and use some loctite, and it will outlast you.

 

[Peterooster]

You know Pete, if you knurl it you can use your existing one. Just have it knurled and use some loctite, and it will outlast you.

It is worn .010", I am more concerned with the bearing face. Knurling a good idea, thanks. Pete