source for 28-29 fender light lens

jambottle

jambottle

Senior Member
lights are fine the way they are but it looks more like a flaw in one of the lens. the flaw does not extend to the outside of the lens.but i would replace the lens if i could find one.the lights look like miniture headlights.i may be able to find one in florida flea markets this winter.
 

Attachments

  • IMG_0180 (Small).JPG
    IMG_0180 (Small).JPG
    44.4 KB · Views: 86
  • IMG_0181 (Small).JPG
    IMG_0181 (Small).JPG
    41.3 KB · Views: 81
Last edited:
Re: source for 28-29 clearance light lens

Can't help on the lens, but also the Phillips screw wouldn't be correct for a Model A.
 
Re: source for 28-29 clearance light lens

Till you find another, which may be a while, maybe a clear epoxy to fill in the chip. Those lamps may be more common up north but not so much down here. Keep your eye on US ebay too, every so often (not very) they pop up.
 
In truth they are parking lights. Same as the cowl only on the fenders. Some places required a light being shown to the front and rear after dark on car and trucks parked on the street, same as say, England.
 
As redmodelt said, clear epoxy might work. I had accessory light lens with a chip and went to my local glass repair place . They had some that worked great--until it crashed to the pavement when when one of the workers drove off in the truck where the lens had been placed on the fender to cure in the sun.
 
since they wernt made in Canada,the screws would have been slotted
tom
 

Attachments

  • MVC-008S.JPG
    MVC-008S.JPG
    28 KB · Views: 15
You must log in or register to reply here.
Back
Top