tool space covers 1939 Ford

[oldford2]

Where can I get a pattern for the 2 tool space covers in a 39 coupe trunk? Thanks John

 

[oldford2]

Were they made of plywood? Thanks

 

[Lawson Cox]

Yes, plywood. Check with Roy Nacewicz to see if he is making them yet.

 

[gmc1941]

Mine were made out of plywood 5/8. I trace them out and threw the old ones out. So I can't say the pattern is orginal. Gordon Sorry

 

[Milt/Las Vegas]

I had an original one in my 40 conv.that was in bad shape,but intact enough for a pattern.It was 3/8 plywood.I made 2 for my coupe and 2 for my conv.

 

[Vic Piano]

Where can I get a pattern for the 2 tool space covers in a 39 coupe trunk? Thanks John

John, if you can wait till you get down to Florida, we can use my '39 CS to make a set. Vic

 

[c-gor]

Send me an e-mail to c.gorris@prodigy.net. I'll help you out.

 

[Kube]

Roy Nacewicz is making the best reproductions on the market. They were patterned after a very nice pair of originals I allowed him to use.
His number is: 734-654-9450 or website, www.fordbolts.com

 

[19Fordy]

Where can I get a pattern for the 2 tool space covers in a 39 coupe trunk? Thanks John

I will trace the one's in my 40 coupe and mail the template to you if they are the same as the 39. I made them from the originals years ago. They fit just fine.