Charles Reese
Well-known member
- City
- Richmond
- State
- Va
These are for the ‘clamp’ that holds the spring leaves together, not the spring-to-frame 'clip'.
Front Spring:
2 BOLTS: square headed (1/4”-20 x 2-3/8”), with special shoulder
2 NUTS: 1/4-20 hex nut {special 3/16” thick x 1/2” wide}
Rear Spring:
2 BOLTS: square headed (1/4”-20 x 2-7/8”) with special shoulder
2 NUTS: 1/4-20 hex nut {special 3/16” thick x 1/2” wide}
plz email me direct careese@vcu.org (always looking for other E28 items)
Front Spring:
2 BOLTS: square headed (1/4”-20 x 2-3/8”), with special shoulder
2 NUTS: 1/4-20 hex nut {special 3/16” thick x 1/2” wide}
Rear Spring:
2 BOLTS: square headed (1/4”-20 x 2-7/8”) with special shoulder
2 NUTS: 1/4-20 hex nut {special 3/16” thick x 1/2” wide}
plz email me direct careese@vcu.org (always looking for other E28 items)
Attachments
Last edited: