Power steering for 52

[petehoovie]

You are correct

 

[tubman]

It looks like there is a third belt driving the power steering pump; that complicates things further. I would imaging that a "3-groove" pulley might be the scarcest part.

 

[Merc Cruzer]

It looks like there is a third belt driving the power steering pump; that complicates things further. I would imaging that a "3-groove" pulley might be the scarcest part.

Actually the scarcest part, if it didn't come with the system you purchase, is the end plate that attaches to the passenger side frame, that holds the idler arm. It may take a while , but they do show up from time to time, but not cheap.

The pictures show what you have now (2 belt pully) and the 3 blet pulley you will need for the PS system pump.

 

[petehoovie]

Actually the scarcest part, if it didn't come with the system you purchase, is the end plate that attaches to the passenger side frame, that holds the idler arm. It may take a while , but they do show up from time to time, but not cheap.

The pictures show what you have now (2 belt pully) and the 3 blet pulley you will need for the PS system pump.

 

[tubman]

Actually the scarcest part, if it didn't come with the system you purchase, is the end plate that attaches to the passenger side frame, that holds the idler arm. It may take a while , but they do show up from time to time, but not cheap.

The pictures show what you have now (2 belt pully) and the 3 blet pulley you will need for the PS system pump.

Since I would be fabricating just about all of the brackets; that still looks to me to be the easiest one of all. I would also try to get by with two belts.

 

[Merc Cruzer]

Since I would be fabricating just about all of the brackets; that still looks to me to be the easiest one of all. I would also try to get by with two belts.

Sounds like a "major" project. Good luck.