more parts to identify

[yachtsmanbill]

WHEW !!! I read that to include the spacers AND the hubs, no? ws

 

[t42]

The adapters look like 5 bolt T hubs (5"BC) onto 5 bolt A wheels (5-1/2"BC). I had a set just like these years ago that JC Whitney provided.
I have a strange set (5) of 5" BC T wheels that take the '28/'29 hubcaps and not the standard '26/27 caps.

 

[jimvette59]

better view of the spacers. Found this info on the net. It was suggested to me that these may be for switching from T wood spoke to wire wheels.

These wheel adapters that will space your 5 lug 5" HUB pattern to a 5 lug 5" WHEEL pattern about 1" inch. SEMA approved and made from high grade heat-treated aluminum. Each adapter is approximately 1" thick.

That is no way to measure a bolt circle.

 

[Dick Webber]

I had those adapters figured to mate T wood spoke hubs (6 holes) to late T wire wheels 5 hole 5 inch spacing.

 

[t42]

Take a piece of paper and cut out a 5" circle, and take another piece and cut out a 5-1/2" circle and lay them over the adapter and see how they line up. You will know that A and T items are used.

 

[BUBBAS IGNITION]

Just for the record the hubs adapted a five bolt T wire wheel ( hard to get) to a model a 5 1/2 pattern ( easy to get)....

 

[Dick Webber]

Thanks. Now I finally get it.