mercury motor mounts

Here is my Flattie in my 34 Ford project. The adapters were found on Ebay, think they were around $70 (Ford Part #41A-6023) I also had to cut the flange off the crank pully so it would not hit the crossmember. I plan on using the stock radiator and 46-48 Distributor. Its a tight fit, less than an inch from the firewall.

 
Here is a pic I lifted of Ebay a few years ago.


Ford Engine Mount Adapters #41A-6023.jpg
 
You must log in or register to reply here.
Back
Top