KR Wilson Model A Tool Cabinet

Jim Mason said:
buy it now at $150 aint bad. wish i were close enough...fwiw,jm
Click to expand...

I, like you Jim, would dread the 2,000 mile round trip just to retrieve it.

Do you think there is enough interest in one of these cabinets where a set of detailed drawings or prints could be made available for those who also like to make "sawdust" and could build one for their garage out of locally available lumber?
 
Was busy comparing pic's to the31-32 catalog and the shelf arrangment is abit different. Possible a different year or model. Contemplating the buy it now at the moment. Rod
 
Rowdy said:
Was busy comparing pic's to the31-32 catalog and the shelf arrangment is abit different. Possible a different year or model. Contemplating the buy it now at the moment. Rod
Click to expand...


Go for it Rod!!:D Then make up a set of drawings of it and sell them to offset your fuel bill going down to get it!! ;)
 
Will let you know what I decide. BTW, Did you ever get around to looking at the pic's and e-mails I sent you? Never heard anything back, but this summer has been a blurr anyway. Rod
 
I'd give a few bucks for a measured drawing.
Brent how did your shop layout turn out? Look into lean manufacturing (cell work stations, 5s etc). Might be of interest to you....fwiw,jm
 
At $20 a copy of the plans I likely could make it pay, not sure how many would want the plans beyond just talk. Rod
 
Got it...... Anyone who wants drawing send me a PM, and I will work on them over the next few weeks. Should have it here by Thursday at the latest. Rod
 
Reposting this as it got buried, seems to be a bad thing about more than 4 replies deep.

Got it...... Anyone who wants drawing send me a PM, and I will work on them over the next few weeks. Should have it here by Thursday at the latest. Rod
 
Rowdy said:
Reposting this as it got buried, seems to be a bad thing about more than 4 replies deep.

Got it...... Anyone who wants drawing send me a PM, and I will work on them over the next few weeks. Should have it here by Thursday at the latest. Rod
Click to expand...

I'm in for a set at $20.00. Hopefully you can sell 50,000 sets!! ;)
 
Will e-mail you when they are done Jim. My 16 year old daughter has volenteered to strip off the old paint and repaint it machinery grey, which should be close to origianl grey. Now to make room for it. Rod
 
You must log in or register to reply here.
Back
Top