Holes in SS trim

[metro1]

Unfortunately the previous owner fastened some of the stainless steel trim with screws. Anyone have experience with repairing the holes?

 

[frank long island]

if you have a tig torch you could weld them also could be done with a mig using ss wire and correct gas sand and polish

 

[deuce5wndw]

I have fixed them using my Cobra torch and stainless rod.

 

[metro1]

The metal so thin I would be afraid of warpage or burn through if I used a torch. I'll have to find some scrap pieces to practice on. I don't have a tig outfit but I could get some stainless wire for my mig welder.

 

[chain drive]

tig it