Ford Faithful Oiler...

[39portlander]

Interested in this item I noticed in the recent Snyders catalog. Is anyone using one of theses and any input would be great.

 

[29spcoupe]

I have one on one of my T's. They work great, much better than the oiler that attaches to the magneto plug. Send a lot of oil down to the front main. John

 

[Dodge]

Have had one on both of my cars for over 50yrs. work great.

 

[stevests]

Chaffin's Garage is the manufacturer of the "new" Ford Faithful Oiler Kit.

 

[39portlander]

Thanks for the input fellas, I will check out Chaffin's about that item. I need to order Glenn's Ruckstell book as that will be my next project for the 26.

 

[39portlander]

Got my oiler this week, did not have any instructions and understand were the upper and lower parts bolt to the motor.

If someone could post a picture, I would like to see how you routed your tubing from port to port, thanks.

 

[JoeBauer]

These are really good oilers. I suggest that you use the magnet with them.

I have two. The line follows the same rout on both. On one I used the copper tubing sent with the oiler and it was exactly the correct length.


On the other (shown in the pictures), I used 1/4" pipe, tubing, and a screen filter. This is a fairly new rebuild and I want the filter to catch any fluff from the transmission bands.

 

[redmodelt]

You can mount the hose anyplace as long as it's downhill to the footplate from the pickup. There really is not a specific place to mount it.

 

[39portlander]

Joe thanks for taking the time to post those pictures, I also checked on the MTFCA site that had some as well.