Flairing Lines for the Car

[KULTULZ]

Kultulz, remember the Compression Fitting I found on the rear brake line?

Just a few of the things I've found that weren't just quite right
And there is only one line at the Master Cylinder....

And that passed CA STATE INSPECTION?

 

[Jwawhite]

Kultulz, CA really doesn't have vehicle inspections. CA does have SMOG Stations
to check for emissions and costs about $50 every two years. But if you have an older vehicle perhaps 25 years old? SMOG Tests are waived.

 

[KULTULZ]

CA really doesn't have vehicle inspections ...

Now that is surprising (to me) ...

 

[Jwawhite]

Kultulz, would you happen to have the Ford part # for the connector?
Ford Parts no longer carries barbs, will have to buy aftermarket obsolete part. Thnx

 

[KULTULZ]

... hmmph ...

Guess they were a few model runs back ...

See selection here JW - https://www.summitracing.com/search/brand/dorman/part-type/fuel-line-connectors

DORMAN is the supplier. Their site is down right now but SEARCH and you should find their cataloging for NYLON FUEL LINE CONNECTORS.

It may be here - https://www.dormanproducts.com/Sorry_Unavailable.html

If you are going to re-use the rubber line, it needs a special clamp. They should have those also.

 

[KULTULZ]

Here's another source - https://catalog.fmsiinc.com/category/quick-connectors

View the complete catalog as they seem to have all you would need.