Dual Master Cylinder

mrtexas

mrtexas

Well-known member
Anyone know the model number of a dual master cylinder that can be used with a battery box type master cylinder mount? I currently have a Wilton battery box with a single cylinder MC.
 
Some of the people on the HAMB have a great deal more experience on his subject and can probably give him a part#, vendor, personal experience, etc. Many from the HAMB visit here also, as do many from the EV8 board. JMO
Paul in CT
 
1931 flamingo said:
Some of the people on the HAMB have a great deal more experience on his subject and can probably give him a part#, vendor, personal experience, etc. Many from the HAMB visit here also, as do many from the EV8 board. JMO
Paul in CT
Click to expand...

Yes, you're right, Paul. And let me apologize right up front if anyone takes my response as critical: it was not intended to be.
 
Will this work? Link:
Dual Master Cylinder
It is 1" bore, max 1.10" stroke. You may need to re-do the crank ratio and mount on your battery box, but the bottom exits and nice separate 4 oz. plastic reservoirs are a plus. You do not need the optional remote resivoir kit shown in the link above. It has built in residual valves for drum/drum, and two built in bleeds, so things are greatly simplified. A rebuild kit is available for it, too.
 
BillLee/Chandler, TX: Did not think you were being critical, but there are some purists as seen in some previous posts as to what constitutes an A. This is a safety issue and I was just trying to help.
Paul in CT
 
I want to switch to a battery box dual cylinder also. I am thinking of the master cylinder Dave Delmue uses. You would have to make a 90degree adapter for the Wilton box. Also I noticed the Wilwood m/c above is foe 3/16 lines. Could you adapt that to1/4?

LINK http://modelaonly.com/about_us
 
You must log in or register to reply here.
Back
Top