changing brake cam support
- Thread starter burner31
- Start date
redmodelt
Well-known member
You have to pull the hogs head to replace the low(clutch) cam. This part;
https://www.modeltford.com/item/3428.aspx it's riveted to the shaft which needs to be supported when the rivet is driven out. Also, the shafts go thru them so yes the pedals need to be removed. You might be able to get to the head of the bolt thru the door for the brake cam, but don't think you could for reverse. Don't loose the bolts, they are special thin headed ones.
https://www.modeltford.com/item/3428.aspx it's riveted to the shaft which needs to be supported when the rivet is driven out. Also, the shafts go thru them so yes the pedals need to be removed. You might be able to get to the head of the bolt thru the door for the brake cam, but don't think you could for reverse. Don't loose the bolts, they are special thin headed ones.