Attn- cobra joe

[KULTULZ]

... hmmpf...

Cannot attach a photo to PM...

Here is the ILL you asked for-

 

[Cobra Joe]

Thanks KULTULZ, looks like I need 5736 & 5741, upper and lower both sides. If anybody knows a source, I'd appreciate it.

 

[KULTULZ]

If anybody knows a source, I'd appreciate it.

EATON SPRING- https://www.eatondetroitspring.com/

 

[Cobra Joe]

EATON SPRING- https://www.eatondetroitspring.com/

I tried their website after you had suggested it yesterday, but no luck.

..and as far as "parts and installation kits"; this is all they show:

 

[KULTULZ]

I tried their website after you had suggested it yesterday, but no luck.

...hmmph... ...strange...

OK...

The retainers are B2AZ 5736-A Qty 4

The insulators are B7AZ 5741-A Qty 4

Check Here- https://www.autokrafters.com/p-22349-insulator-rear-spring-55-60.aspx

The retainers are common 52-57 but the insulators are 57 unique.

 

[Cobra Joe]

Thanks again KULTULZ. One of the guys on the 57 Ford Forum hooked me up with these guys:
http://www.classicautopartsonlinecatalog.com/app.php?BookCode=fsz17flx they had all the parts I needed on page 89 (and the rubber insulators were $3 cheaper/each than Autokrafters). Your part numbers made the whole process "idiot proof" as they listed the Ford numbers also.
Thank you again,
Joe

 

[KULTULZ]

Thanks again KULTULZ. One of the guys on the 57 Ford Forum hooked me up with these guys:

http://www.classicautopartsonlinecatalog.com/app.php?BookCode=fsz17flx

they had all the parts I needed on page 89

HEY! Glad you found them.

Let us know the quality when you get them...

 

[Cobra Joe]

They came in today, quality looks really good. just need the U bolts now.

 

[KULTULZ]

THANX!

Now the board knows where to source them.

What did you decide regarding the HDL's? ...

 

[Cobra Joe]

I have accumulated all the parts, now just need to figure out if I want to use it a little now that the decent weather has finally arrived, or tear right into it?

 

[KULTULZ]

I have accumulated all the parts, now just need to figure out if I want to use it a little now that the decent weather has finally arrived, or tear right into it?

Did you just decide to re-work the fender fronts?

 

[Cobra Joe]

Yeah, I think I'm really going to try and make my fenders work and , lol, see if I can't save the reworked '57-'58 headlight doors. We shall see....

 

[KULTULZ]

Yeah, I think I'm really going to try and make my fenders work and , lol, see if I can't save the reworked '57-'58 headlight doors.

We shall see....

Well, be gentle. She is pretty and delicate...