'31 Roadster interior panels, std vs. dlx

~1930 [112,901 Produced] ~ 1931 [5,499 produced] Model 'A' Standard Roadster Interior Trim Scheme.

Trim Scheme=Black; Seats, Seat Back Frame, Seat back belt, Rail, Welt, Seat Side and Windlace.

Door Cowl= Black Cobra Cross Grain Cardboard.

Floor= Black Rubber.

Hardware= Nickel Plate.

Rumble Seat= Black Cobra Cross Grain Artificial Leather.

Front Seat, Back Seat, and Deck Sides=Black Cobra Cross Grain Cardboard.

Floor= Black Rubber.

____________________________________________________________________

~1930 [11,313 produced] ~ 1931 [52,997] Model 'A' Deluxe Roadster Interior Trim Scheme.

Trim Scheme= Tan.

Seats= Two Tone Tan Bedouin Grain Leather.

Door, Cowl, Seat Back Frame, Seat Back Belt Rail, Seat Welt, Seat Sides and Windlace= Two Tone tan Bedouin Grain Artificial Leather.

Floor= Brown Carpet

Hardware= Butler Finish

Rumble Seat= Two tone tan Bedouin Grain Artificial Leather.

Rumble Seat Compartment -->[Front Seat, Back and Deck side]=Two Tone Tan Bedouin Grain Cardboard.

Floor= Black rubber.

Deluxe Special low Windshield Frame with conforming Windsheild Wings and Stanchions were Chromium Plated.
Rubber weatherstrip on bottom of doors. No sill plates on any open cars.

skip.

Cutawayroadsterbody.jpg


Buttonholesshown1.jpg
 
Last edited:
Thanks Skip! Good info there, just what I needed. So it looks like for the cowl/door/seat side panels it was mainly a material and color difference then.
 
Back
Top