I am making a hammerform to replace the inner door structures. The doors i have are in poor condition and they do not measure the same. Each door measures 18 1/2 @ bottom, inside; the top varies up to 19" wide inside.
Can any of you guys post your door widths, this is an inside measurement at the inside edge - no allowance for bevel, but it is the inside edge of the perimeter beading.
Thanks, oj
Can any of you guys post your door widths, this is an inside measurement at the inside edge - no allowance for bevel, but it is the inside edge of the perimeter beading.
Thanks, oj
