1937 Toro Model B Tractor - Model A Engine?

Yes, that was very common. I've seen a few smaller Toro's with A or B engines. Some even sold the tractor kits to convert your chassis into a tractor.
 
It even has the "blanking plate" where normally for the Model B a fuel pump is located.

Gordon Smith did the same thing.

Its always kind of a thrill to open one of these "aftermarket" engines and find it has counterweights on the crank. I think Ford reserved the counterweighted B engines for the "higher use" end users.


Joe K
 
Ford made the industrial model A engines up to 1941 so they were used by agricultural equipment manufacturers as well as other industrial uses.
 
568687


1937 Toro Model B Tractor
 
Ugh..... John Deere colors on a Toro. Would probably pulled more money in the correct colors.
 

Attachments

  • toro.jpg
    toro.jpg
    65.2 KB · Views: 34
In the late 1940's my father, and a friend that was an airforce (RCAF) veteran, started a small business to "hard surface" driveways, tennis courts, parking lot's etc. They bought a small "steam roller", possibly homemade, that used a Model A or B motor. I have a photo of it with me behind the wheel. I didn't know it at the time, but this was probably my first experience driving a Model A but sure wasn't my last. I'll dig out the picture and see if there is enough detail showing to tell if it an A or B engine.
 
Back
Top