- City
- Burnsville
- State
- MN
- Price
- $13,900
1930 Model A Sedan ***13,900/OBO/Trade
NEW PRICE... READ BELOW... Looking for a hotrod that you can make your own and drive. This is it. This is a solid car that I have driven alot with no problems. Listed are some of the items that I have on the car.
*327 Chevy SMB out of a 63 corvette
* Bored .30 over
* New Cam (previous owner put the cam in so I am not sure which one)
* New Roller Rockers
* F100 Steering Box (I believe early to mid 50's)
* Muncie 4 Speed Trans
* 9 inch Rearend (Not sure of gearing but drives very well on highway and has really good low end torque)
* Boxed Frame
* 4 inch dropped tube axel
* New Tie Rod Ends (Just put on)
* New Belstein Coil Over Shocks (Just put on)
* New Black Diamond WWW Radials (Just put on)
* New V8 Caps (Just put on)
* New Wheel Vintiques 15" rims sprayed in DP90 Primer (Just put on)
* New Master Cylinder (Just put on)
* New Wheel Cylinders in rear (11 inch drum brakes)
* New Brake Shoes on entire car
* Early 40's Ford Drums up front
* New Rearview Mirror
* Mild Body Work done and sprayed in DP90 Primer
* Roof was filled by previous owner
* All Windows roll up and down accordingly
* Doors close very well
* Original Gas Tank. Super Clean inside
* GM front seats on sliders with seatbelts
* Rear bench seat with seatbelt
I have put alot of time and money into this car but it must go! The car needs front wheel cylinders replaced or maybe even step up to a self energizing drum up front. Other than that this car is super solid as stated earlier. Looking for Model A Coupe on 32 frame. Thanks for looking and please don't hesitate to reach out with questions. $13,900 OBO ***If money is tight I can sell this car with a different wheel and tire combo for $12,500.
NEW PRICE... READ BELOW... Looking for a hotrod that you can make your own and drive. This is it. This is a solid car that I have driven alot with no problems. Listed are some of the items that I have on the car.
*327 Chevy SMB out of a 63 corvette
* Bored .30 over
* New Cam (previous owner put the cam in so I am not sure which one)
* New Roller Rockers
* F100 Steering Box (I believe early to mid 50's)
* Muncie 4 Speed Trans
* 9 inch Rearend (Not sure of gearing but drives very well on highway and has really good low end torque)
* Boxed Frame
* 4 inch dropped tube axel
* New Tie Rod Ends (Just put on)
* New Belstein Coil Over Shocks (Just put on)
* New Black Diamond WWW Radials (Just put on)
* New V8 Caps (Just put on)
* New Wheel Vintiques 15" rims sprayed in DP90 Primer (Just put on)
* New Master Cylinder (Just put on)
* New Wheel Cylinders in rear (11 inch drum brakes)
* New Brake Shoes on entire car
* Early 40's Ford Drums up front
* New Rearview Mirror
* Mild Body Work done and sprayed in DP90 Primer
* Roof was filled by previous owner
* All Windows roll up and down accordingly
* Doors close very well
* Original Gas Tank. Super Clean inside
* GM front seats on sliders with seatbelts
* Rear bench seat with seatbelt
I have put alot of time and money into this car but it must go! The car needs front wheel cylinders replaced or maybe even step up to a self energizing drum up front. Other than that this car is super solid as stated earlier. Looking for Model A Coupe on 32 frame. Thanks for looking and please don't hesitate to reach out with questions. $13,900 OBO ***If money is tight I can sell this car with a different wheel and tire combo for $12,500.
Attachments
Last edited: