1927 Coupe Window Wood

Flathead Dave

Well-known member
Does anyone know what size wood is used for the windows of the 1927 Coupe? I would rather make my own window frames than spend the money on something that I know that I can make my self.
 
Last edited:
The only wood I have in my coupe is the rear window. Top and bottom wood is 1-1/2" by 1" and the side pieces are slightly smaller 1-1/4" by 7/8". Hope this helps. No wood in the 1/4 windows.
 
There is two different wood sets for the 26-27. From what I have figured out is that the early '26 has wood around the quarter & rear windows. The new and unproved '26-'27 has metal around the quarter windows, and around the rear windows, no wood. I have both types. Both have a metal brace that goes to the floor I had bought a '27 Coupe for spare parts for my '27 Coupe. and they are completely different under the skin. Under the dash it's a big difference. I replaced my cowl with my other one, and it was a can of worms I opened up. Even the "A" pillars are different. One the "A" pilars hold the dash mounts, and the other, the cowl holds the dash mounts. The rain gutters for the trunk is beefer & stronger on the later one also, and the header plate is also completely different design.

Here's pictures of both.

Pat
 

Attachments

  • P1010001x.jpg
    P1010001x.jpg
    84.7 KB · Views: 11
  • 453310.jpg
    453310.jpg
    39.9 KB · Views: 15
  • 453311.jpg
    453311.jpg
    119.9 KB · Views: 12
  • 452772.jpg
    452772.jpg
    50.2 KB · Views: 10
  • 452773.jpg
    452773.jpg
    24.9 KB · Views: 11
  • 452877.jpg
    452877.jpg
    37.4 KB · Views: 11
Back
Top