Search results

I have seen some classic show cars from the 30's with oil filters that looked like this but they had been rebuilt to use a modern cartridge. Does anyone know who does this modification or what they do exactly to do it?

Anyone know part number or how to find vintage oil filter like one in the picture?

I was able to clean out all the lines. I found that the copper tube from the glass wasn't soldered properly to the hex tube because it was too short. Probably broken off in a previous attempt to repair. I spliced in a piece of copper tube and resoldered. I checked all the lines to be open and no...

I was successful in drilling out the old cone, only to find the hex tube clogged with dried remnants of the old fluid. I was able to chip out most of it from hex tube and glass tube with wire and pipe cleaner. The very small copper tube connecting the hex tube to the glass tube is also...

See Pics

I will have to drill out the top of my hex tube as my old cone was broken off flush with the top. [IMG][IMG]

Thanks Again The picks are very helpful. I assume the capillary tube is only inserted to the end of cone and then soldered on the other end. Your picture of the open Hex tube isn't what I had expected. I would have thought it would have been open, possibly with the calibration wires visible????

Thanks for the information. My old connector was broken off with part still in the top of the hex tube. Do you know if this is a tapered hole? I guess I will have to drill it out. Any idea what the hole size should be? I am guessing just slightly bigger than the pointy end of the cone.

I purchase a KS Repair kit some time back. I am now at the point of installation, and I want to make sure I do it right. Gauge tube coupler tube nut tube <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< I am not sure which direction the coupler should be in the...

Thanks for all of the advice. Lon

I have a crack in my block into the water jacket. It really isn't in a spot that I can drill/tap or weld. What is your experience with Belzona 1111 Vs 3M Panel Bond adhesive Vs Devcon F for fixing cracked blocks. Is the Belzona 1111 really worth the price?

What is your experience and or recommendations for use of subject wire for our old cars. If you think your lights may pull 20 amps, what gauge CCA would you need Vs all copper for a 10 foot run.

Does anyone know of someone that rebuilds/reconditions vintage car horns mechanisms? Any contact info would be appreciated. Thanks Lon

Please tell me more about steve smith in morristown indiana. Does he have a regular business in the repair of vintage horns, I have a couple that need refurbishment. Please provide contact info for steve Thanks Lon

I have a new King Seeley Gas Gauge kit including capillary tube, fittings and gauge liquid (2 vials) for sale. Contact 541 231 2939 or Boxsters986@comcast.net

This item is still For Sale

I have a new King Seeley Gas Gauge kit including capillary tube, fittings and gauge liquid (2 vials) for sale. Contact 541 231 2939 or Boxsters986@comcast.net

Where can I buy a King Seeley Fuel Gauge Repair Kit?

Thanks for the references. I think I'll go with the two step process starting at 30 lb/ft then finish at 45 lb/ft. using one of the stock ford torque patterns that start in the middle and proceed in circular fashion toward front and back.

I am looking for the Offenhauser Flathead torque spec and pattern for 51 Merc flathead. Thanks in advance for any information