Search results

It appears I do not have the original 39 ignition system or coil but a 42 to 47 style coil and distributor? At least from the pictures I have seen appears to be. I assume these didn't have resistors in the coil? This coil is producing spark with just 2 volts, but what I find happens once the...

The car does have the original coil. Thanks for the other tips. Thinking about this a bit more, the total voltage drop across the circuit must equal supply voltage. So if the coil is only dropping 2 volts then I am thinking that some of the winding's are shorted together?

I am working on a 39 Ford Deluxe. The car basically won't start once warmed up so did some troubleshooting on the ignition. I read on this site that the voltage across the coil should be 3.5 to 4 volts and that seems to be based on a supply voltage of 6 volts so assume the ballast resistor is...

I had tried washer number 68-1184A from the Early Ford Store. These are the right size if you can pull the sleeve out take a bit out of the drum to make room for the washer and put the sleeve back in. Not sure what that would take or if it's even worth it. As Gary said I used the sides of the...

It's the wide 5 but there are adapters available as Tom T mentioned to go from the 5.5 to the wide 5.

Will the 39 backing plates work with the 40 drum and hubs?

Thanks. I can wait if nothing else comes along.

Thanks, was thinking I would have to get the 40 style wheels, sounds like a viable option if nothing is available.

Will 37 and 38 Drums fit? Found a used set but price seems high at 250 plus shipping but don't seem to be too many around.

Makes sense, it does look like a smaller pattern.

Guys maybe someone can lead me in the right direction. As I continue to take apart the 39 Deluxe I am working on I find new issues. I got the rear drums off and they do not look good, worn really bad. Did some searching and seems they are not reproduced. I am not sure of the 40 Ford wheel bolt...

I am in Southern Louisiana just east of Baton Rouge. How do I tell if the car is a Standard or Deluxe. I'm a newby to these cars? It looks like someone must have installed a kit to mount the tube shocks, one of the mounts is tearing away at the bolt at the top, I had planned on fixing it with...

Thanks for the feedback. As I said I am working on it for someone else so am totally new to cars this old. My current oldest is a 62 Ranchero.

Ah I suspected that it might have had the lever arm type. I am looking for a modern tube type shock absorber, that's what's on it now and I made the assumption that might have been what was there originally but in my searches did see some lever arm shocks.

Guys, new here and new to working on a car this old so please excuse my ignorance. I am working on a 39 Business Coupe for an older fellow who's not very mechanically inclined and am looking for some shock absorbers for the car but can't seem to locate any. Any ideas on where to find some or a...