Search results

I ran across this some time ago. Westach has a good reputation, but I have not bought one of these. https://www.westach.com/voltmeters

I can not find any link on the wed site to order a relief valve or any other needed parts.

For some reason the whole thread address did not post. This should work. https://www.vintagefordforum.com/forum/model-a/401812-best-way-to-manifacture-attach-trailer-hitch-to-a-1929-tudor

Check this out. It is on another forum but has information on manufactured trailer hitches for Model A's https://www.vintagefordforum.com/forum/model-a/401812-best-way-to-manifacture-attach-trailer-hitch-to-a-1929-tudor

Found this in my notes from the last time I bought one. Epoxy filled ignition coils: 6 Volt – Pertronix 1.5 ohm – PNX-40111 12 volt - Pertronix 3.0 ohm - PNX-40611

Radiator paint is a special paint so that it does not limit heat transfer. https://www.eastwood.com/ew-radiator-black-paint-gloss-aerosol-12-oz.html

I would call Steve ar Berts.

You might try Bert's. The last time I bought wood from them they would sell individual pieces.

I am lucky enough to live in the Denver metro area. I have never had a bad experience there and would recommend them to all A owners. I have owned several T's for over 45 years and bought my first A about 3 years ago. Since I did not know anything about A's Steve has patiently answered a lot of...

Here is where mine is located. The speakers and antenna are under the headliner.

I am fairly new to Model A's buying my first one in 2015. Here is a list of my complete cars. 1907 Model R - unrestored and not running. Overall good condition. 1914 Touring - Restored but it broke its crankshaft on a tour - Pulling motor 1917 Roadster - In process of repainting but running 1923...

Could be a stripped timing gear. Double check your timing.

Check the link below for a LED light that I am using. It works with either 6 or 12 volts. Nice and bright and you won't burn your fingers! https://modelastore.com/index.php?route=product/product&product_id=18460&search=bulb&category_id=0&page=3

I logged a little over 5000 in my Town Sedan this year!

In my experience the wipers don't work even if they do work. Rain X is your friend

I freed up a 1907 Model R engine by putting a jack under the crank to keep pressure on it and adding acetone ATF mixture in the cylinders and then used a heat gun to warm the cylinders. It took about 5 days of this and when I went to the garage to warm them again I found it had broken loose and...

Rotella still contains about 1200 ppm zink. https://en.wikipedia.org/wiki/Shell_Rotella_T

Buy a ignition switch with an accessory position and wire the pump to the accessory position

I would try Fastenal https://www.fastenal.com

I am no expert but in the picture you posted it sure looks like the retaining nut is still on.